Systems. Methods. Technologies 2 (42) 2019

Systems Methods Technologies. P.M. Ogar et al. Application of energy … 2019 № 2 (42) p. 18-26 26 metodami po kharakteristikam tverdosti: RD EO 0027-2005. M.: FGUP KONTsERN «ROSENERGOATOM», 2005. 47 p. 14. Sonmez F.O., Demir A. Analytical relations between hardness and strain for cold formed parts // Journal of materials processing technology. 2007. V. 186. P. 163-173. 15. Matthews J. Indentation hardness and hot pressing // Acta metallurgica. 1980. V. 28. P. 311-408. 16. Herbert E.G., Oliver W., Pharr G. On the measurement of yield strength by spherical indentation // Philosophical Magazine. 2006. V. 86. P. 5521-5539. 17. Habbab H., Mellor B., Syngellakis S. Post-yield characte- risation of metals with significant pile-up through spherical inden- tations // Acta materialia. 2006. V. 54. P. 1965-1973. 18. Xu B, Chen X. Determining engineering stress–strain curve directly from the load–depth curve of spherical indentation test // Journal of Materials Research. 2010. V. 25. P. 2297-2307. 19. Haušild P, Materna A, Nohava J. On the identification of stress–strain relation by instrumented indentation with spherical indenter // Materials & Design. 2012. V. 37. P. 373-378. 20. Cao Y.P., Lu J. A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve // Acta Materialia. 2004. Vol. 52. P. 4023-4032. 21. Lee H., Lee J.H., Pharr G.M. A numerical approach to spherical indentation techniques for materical property evaluation // Journal of the Mechanics and Physics of Solids. 2005. Vol. 53. P. 2037-2069. 22. Hernot X., Bartier O., Bekouche Y., El Abdi R., Mauvoi- sin G. Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation // International Journal of Solids and Structures. 2006. № 43. P. 4136–4153. 23. Kim S.H., Lee B.W., Choi Y., Kwon D. Quantitative de- termination of contact depth during spherical indentation of me- tallic materials-a FEM study // Materials Science and Engineering A. 2006. V 415. P. 59-65. 24. Collin J.M, Mauvoisin G, Pilvin P. Materials characteriza- tion by instrumented indentation using two different approaches // Materials and Design. 2010. Vol. 32. P. 636–640. 25. Kukhareva I.E. Apply indentation to build a stretch curve // Vestnik KhNASU, iss. 54, 2011. P. 33-39. 26. Matjunin V.M., Volkov P.V., Demidov A.N. Automated express analysis of the mechanical properties of the surface layers of the treated metal by the method of continuous indentation // Tekhnology of metals. 2013. № 2. P. 49–51. 27. Matjunin V.M. Indentation in the diagnosis of mechanical properties of materials // Moscow: Publishing House MEI, 2015. 288 p. 28. Shabanov V.M. Rapid diagnosis of the technical state of the metal structural elements of NPP using kinetic indentation method // Technology of technosphere safety. 2013. № 3 (49). P 1-7. 29. Chernjatin A.S., Razumovskij I.A. Indentation method as a way to assess the loading and degradation of the mechanical characteristics of the material // J. of machinery manufacture and reliability. 2015. № 4. P. 40-48. 30. Ogar P.M., Tarasov V.A., Gorokhov D.B. Energy concept of hardness by the kinetic sphere indentation // Advanced Mate- rials Research. 2015. Vol. 1061-1062. P. 579-583. 31. Ogar P.M., Gorokhov D.B. The Relationship between the Deformation of Spherical Indentation and Tensile Deformation // Key Engineering Materials. 2017. Vol. 723. P. 363-368. 32. Ogar P.M., Tarasov V.A., Turchenko A.V. The change in the exponent of the discharge curve during spherical indentation // Systems Methods Technologies. 2012. № 2, P. 39-42. 33. Ogar P.M., Tarasov B.A. Effect of the axisymmetrical load shape on the loaded-strained state of elasticoplastic half- space // Systems Methods Technologies. 2010. № 1. P. 14-20. 34. Ogar P., Gorokhov D., Ugryumova E. Mechanics of un- loading of a rough surfaces pre-loaded joint // MATEC Web of Conferences. 129, 06016 (2017). 35. Ogar P.M., Tarasov V.A. Kinetic Indentation Application to Determine Contact Characteristics of Sphere and Elastoplastic Half-Space // Advanced Materials Research Vol. 664 (2013) P. 625-631. 36. Collin J.-M., Mauvoisin G., El Abdi R. An experimental method to determine the contact radius changes during a spherical instrumented indentation // Mechanics of Materials 40 (2008) 401–406. 37. Bartier O., Hernot X., Mauvoisin G. Theoretical and expe- rimental analysis of contact radius for spherical indentation // Mechanics of Materials, 2010, 42 (5), P. 640-656. 38. Collin J.-M. Correction factor for contact radius in spheri- cal indentation measurements // Mechanics of Materials 50 (2012) P. 47–52. 39. Ogar P.M., Tarasov V.A., Gorokhov D.B. The correction factor in elastic modulus determining by indentation // Advanced Materials Research. 2014. Vol. 887-888. P 997-1000. 40. Central metal portal [Electronic resource]. URL. http://metallicheckiy-portal.ru/marki_metallov/ stk/12X18H10T (accessed: 15.03.2019).