Systems. Methods. Technologies 3 (39) 2018

Системы Методы Технологии. С.А. Гынгазов и др. Влияние добавки … 2018 № 3 (39) с. 159-163 163 References 1. Okada K., Isobe T., Katsumata K., Kameshima Y., Naka- jima A., MacKenzie K.J.D. Porous ceramics mimicking nature – preparation and properties of microstructures with unidirectional- ly oriented pores // Sci. Technol. Adv. Mater. 2011. Vol. 12., № 6. doi: 10.1088/1468-6996/12/6/064701. 2. Colombo P. Conventional and novel processing methods for cellular ceramics // Phil. Trans. R. Soc. A: Math. Phys. Eng. Sci. 2006. Vol. 364, № 1838. P. 109-124. 3. Yuan L., Ma B., Zhu Q., Zhang X., Zhang H., Yua J. Prep- aration and properties of mullite-bonded porous fibrous mullite ceramics by an epoxy resin gel-casting process // Ceram. Int. 2017. Vol. 43, № 7. P. 5478-5483. 4. Wenzel C., Aneziris G.C., Tsetsekou A. A Study on appli- cation of silicon carbide filters for water purification // Proceed- ings of 10th ECerS conference. Baden-Baden: Göller Verlag; 2007. P. 2073-2078. 5. Cuo Z., Liu H., Zhao F., Li W., Peng S., Chen Y. Highly porous fibrous mullite ceramic membrane with interconnected pores for high performance dust removal // Ceram. Int. 2018. Vol. 44, № 10. P. 11778-11782. 6. Shqau K., Mottern M.L., Yu D., Verweijw H. Preparation and properties of porous - Al2O3 membrane supports // J. Am. Ceram. Soc. 2006. Vol. 89, № 6. P. 1790-1794. 7. Hu X.J., Chen W.D., Huang Y. Fabrication of Pd/ceramic membranes for hydrogen separation based on low-cost macropor- ous ceramics with pencil coating // Int. J. Hydrogen Energy. 2010. Vol. 35, № 15. P. 7803-7808. 8. Obradović N., Filipović S., Đorđević N., Kosanović D., Marković S., Pavlović V., Maca K. Effects of mechanical activa- tion and two-step sintering on the structure and electrical proper- ties of cordierite-based ceramics // Ceram. Int. 2016. Vol. 42, № 12. P. 13909-13918. 9. Duan W., Yin X., Luo C., Kong J., Ye F., Pan H. Micro- wave-absorption properties of SiOC ceramics derived from novel hyperbranched ferrocene-containing polysiloxane // J. Eur. Ce- ram. Soc. 2017. Vol. 37, № 5. P. 2021-2030. 10. Vernoux P., Guth M., Li X. Ionically conducting ceramics as alternative catalyst supports // Electrochem. Solid-State Lett. 2009. Vol 12, № 7. P. 9-11. 11. Kelly B.A. Why engineer porous materials? // Phil. Trans. R. Soc. A. 2005. Vol. 364. № 1838. P. 5-14. 12. Rambo C.R., Cao J., Seiber H. Preparation of highly por- ous biomorphic YSZ ceramics // Mater. Chem. Phys. 2004. Vol. 87, № 2-3. P. 345-352. 13. Jones A.C., Arns C.H., Hutmacher D.W., Milthorpe B.K., Sheppard A.P., Knackstedt M.A. The correlation of pore mor- phology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth // Biomaterials. 2009. Vol. 30, № 7. P. 1440-1451. 14. Laasri S., Taha M., Laghzizil A., Hlil E.K., Chevalier J. The effect of densification and dehydroxylation on the mechanical properties of stoichiometric hydroxyapatite bioceramics // Mater. Res. Bull. 2010. Vol. 45, № 10. P. 1433-1437. 15. Coi Y.J., Seeley Z., Bandyopadhyay A., Bose S., Akbar S.A. Aluminum doped TiO2 nano-powders for gas sensors // Sens. Actuators B. 2007. Vol. 2, № 1. P. 111-117. 16. Akbar S., Dutta P., Lee Ch. High-temperature ceramic gas sensors: a review // Int. J. Appl. Ceram. Technol. 2006. Vol. 3, № 4. P. 302-311. 17. Xue W., Huang Y., Xie Z., Liu W. Al2O3 ceramics with well-oriented and hexagonally ordered pores: the formation of microstructures and the control of properties // J. Eur. Ceram. Soc. 2012. Vol. 32, № 12. P. 3151-3159. 18. Tang Y., Miao Q., Qiu S., Zhao K., Hu L. Novel freeze- casting fabrication of aligned lamellar porous alumina with a centrosymmetric structure // J. Eur. Ceram. Soc. 2014. Vol. 34, № 15. P. 4077-4082. 19. Ge H., Wang G., Yuan B., Dong B., Li H. Fabrication and microstructure of porous SiC ceramics using suspension emul- sions as pore forming agents // Ceram. Int. 2014. Vol. 40, № 8 (A). P. 11705-11711. 20. Levkov R.V., Zhukov I.A. Buyakova S.P., Kul'kov S.N. Porous ceramics made of aluminum oxide and hydroxide //Polzunovsky vestnik. 2015. № 1. P. 23-25. 21. Zhai L., Cebeci F.C., Cohen R.E., Rubner M.F. Stable su- perhydrophobic coatings from polyelectrolyte multilayers // Nano Letters. 2004. Vol. 4, № 7. P. 1349-1353. 22. Sviridenok A.I., Krautsevich A.V., Lysenko V.I., Miku- lich S.I., Ihnatouski M.I., Bardakhanov S.P. Friction properties of thin coatings based on epilams nanomodified by silica // Journal of Friction and Wear. 2014. Vol. 35, № 3. P. 225-235. 23. Lin K.L., Chang W.C., Lin D.F., Luo H.L., Tsai M.C. Ef- fects of nano-SiO2 and different ash particle sizes on sludge ash– cement mortar // Journal of Environmental Management. 2008. Vol. 88, № 4. 70 p. 24. Quercia G., Brouwers H. Application of nano-silica (nS) in concrete mixtures // The 8th fib international PhD symposium in civil engineering. 2010. P. 431-436. 25. Liu X.W., Li J.W., Zhou L., Huang D.S., Zhou Y.P. Adsorp- tion of CO2, CH4 and N2 on ordered mesoporous silica molecular sieve // Chem. Phys. Lett. 2005. Vol. 415, № 4-6. P. 198-201. 26. Jain A., Rogojevic S., Ponoth S., Agarwal N., Matthew I., Gill W.N., Persans P., Tomozawa M., Plawsky J.L., Simonyi E. Porous silica materials as low-k dielectrics for electronic and optical interconnects // Thin Solid Films. 2001. Vol. 398-399. P. 513-522. 27. Nair B.N., Yamaguchi T., Okubo T., Suematsu H., Keizer K., Nako S.I. Sol-gel synthesis of molecular sieving silica mem- branes // J. Membr. Sci. 1997. Vol. 135, № 2. P. 237-243. 28. Kuzjukevics A., Linderoth S. Grabis J. Characterization of yttria-doped zirconia powders produced by plasma-chemical me- thod // Solid State Ionics. 1996. Vol. 92, № 3-4. P. 253-260. 29. Ghyngazov S.A., Frangulyan T.S. Impact of pressure in static and dynamic pressing of zirconia ultradisperse powders on compact density and compaction efficiency during sintering // Ceram. Int. 2017. Vol. 43, № 18. P. 16555-16559. 30. Surzhikov A.P., Frangylyan T.S., Ghyngazov S.A. A dilato- metric study of the effect of pressing on the kinetics of compression of ultrafine zirconium dioxide powders under thermal annealing // Russian Physics Journal. 2012. Vol. 55, № 4. P. 345-352. 31. Bardahanov S.P. The use of high-power accelerators of the ELV type for obtaining nanopowders // Problems of atomic science and technology (PAST). Ser. Nuclear Physics Investiga- tions. 2008. № 5. P. 165-168. 32. Bardahanov S.P. Synthesis of hydrophobized nanopowd- ers of silicon dioxide // Vestnik NSU. Series: Physics. 2013. T. 8, № 1. P. 92-98. 33. Gyngazov S.A., Shevelev S.A. Influence of pressing pres- sure of compacts from ultradisperse zirconium dioxide powder doped with bismuth oxide on the sealing efficiency during ther- mal sintering and mechanical properties of sintered ceramics //Russian Physics Journal. 2017. T. 60, № 10. P. 181-184.